๐Ÿ’ง Civil Drainage & Grading Standards

French Drain Slope & Fall Calculator

Calculate exact elevation drop grade (1% or 1/8" per foot), line level string measurements, and trench depth for gravity storm drainage.

๐Ÿ“ Trench Run & Desired Slope Grade

ft
inches

๐ŸŽฏ Trench Grading & Cut Depths

Total Gravity Elevation Drop
6.0
Inches of Fall Over 50 Feet
Final Discharge Trench Depth: 24.0 Inches
Water Flow Velocity
โ‰ˆ 3.2 ft/sec
Self-Cleaning Flow Rate
String Line Level Drop
1.2 Inches
Drop every 10-ft interval
Pipe Invert at 25 ft (Midway)
21.0 Inches Deep
Drainage Pipe Needed
50 ft Perforated
Pop-Up Emitter Required?
Yes (NDS Green 4" Spring)
Gravel Bedding Under Pipe
2" Washed #57 Stone

๐Ÿ› ๏ธ Recommended Tools, Hardware & Building Supplies

Empire Level 360-degree Line Level Set with Cord Hooks
Lightweight durable acrylic line levels snap onto mason string lines to establish a 1% downward slope.
Check on Amazon โ†’
NDS 422G Pop-Up Drainage Emitter with 4-Inch Elbow
Spring-loaded pop-up relief valve opens automatically under water pressure to discharge runoff safely onto turf.
Check on Amazon โ†’
Trenching Drain Spade Shovel (4-Inch Contoured Blade)
Narrow 14-gauge tempered steel spade digs clean, straight vertical trench walls without disturbing yard turf.
Check on Amazon โ†’
Johnson Level & Tool Self-Leveling Rotary Laser Level Kit
Includes laser detector receiver and grade rod for shot-accurate trench depth measurements outdoors.
Check on Amazon โ†’

โš–๏ธ Affiliate Notice: As an Amazon Associate, this site earns from qualifying purchases at no additional cost to you. We strictly link to trade-grade construction tools, hardware, and safety materials.

Frequently Asked Questions

What is the minimum slope required for a gravity French drain?
A French drain requires a minimum downward slope of 1% (which equals 1/8 inch of drop per linear foot, or 1 inch of drop every 8 feet). For high-volume downspout tie-ins, a 2% slope (1/4 inch drop per foot) is ideal to prevent silt and debris from settling in the bottom of the pipe.
What should you do if your yard is completely flat with no natural slope?
If the surface ground is flat, you must dig the trench deeper as you travel away from the house. For a 50-foot trench starting at 18 inches deep, you will manually dig the discharge end down to 24 inches deep to artificially manufacture the necessary 6-inch gravity fall.
Should the holes in a perforated French drain pipe face UP or DOWN?
Always face the holes DOWN! Groundwater naturally rises from beneath the trench as the soil saturates. Perforations facing downward allow rising groundwater to enter the pipe at its lowest point and quickly drain away. If holes face up, water must fill the entire gravel trench before draining.