๐Ÿ High Performance EFI & Fuel Delivery

Fuel Injector Sizing & Flow Rate Calculator

Calculate required injector flow rate (cc/min and lbs/hr), safe 80%โ€“85% duty cycle, and LPH fuel pump delivery for gasoline and E85.

๐Ÿ“ Target Horsepower & Engine Config

HP

๐ŸŽฏ Recommended Injector & Fuel Pump

Recommended Fuel Injector Size
1,000 cc
Standard Bosch EV14 High-Impedance
Flows 89.0 lbs/hr per Injector
Exact Minimum Flow
934 cc / min
At 43.5 PSI base pressure
In-Tank Fuel Pump Flow
270 LPH
Liters Per Hour (+20% safety)
Base Fuel Pressure
43.5 PSI (3.0 Bar Reference)
Injector Impedance
High (12โ€“14 ฮฉ Saturation)
Injector Type
Bosch EV14 / Injector Dynamics
Total Fuel Delivery
โ‰ˆ 60 Gallons / Hour WOT

๐Ÿ› ๏ธ Recommended Tools, Hardware & Building Supplies

Bosch Motorsport EV14 1000cc High Impedance Fuel Injectors
Genuine Bosch multi-hole orifice spray pattern provides stable idle and crisp throttle response.
Check on Amazon โ†’
Walbro / TI Automotive F90000267 450 LPH High Pressure E85 Fuel Pump
Submersible in-tank turbine fuel pump flows up to 450 LPH, supporting 750+ WHP on E85 ethanol.
Check on Amazon โ†’
Aeromotive 13129 EFI Adjustable Bypass Fuel Pressure Regulator
1:1 boost-reference fuel pressure regulator with 1/8" NPT gauge port and -6 AN O-ring ports.
Check on Amazon โ†’
GlowShift Universal Mechanical 0-100 PSI Fuel Pressure Gauge Kit
Vibration-damped silicone-filled dial gauge installs directly on fuel rails to monitor base fuel pressure.
Check on Amazon โ†’

โš–๏ธ Affiliate Notice: As an Amazon Associate, this site earns from qualifying purchases at no additional cost to you. We strictly link to trade-grade construction tools, hardware, and safety materials.

Frequently Asked Questions

Why should fuel injectors never exceed 80% to 85% duty cycle?
At duty cycles over 85% to 90%, the electromagnetic solenoid in the injector does not have enough time to physically close between engine cycles. The injector begins to 'float' or stay locked wide open, causing fuel puddling, loss of fuel metering control, and sudden lean air/fuel mixture spikes that melt pistons.
Why does E85 ethanol require 30% larger fuel injectors than pump gas?
Ethanol has lower chemical energy density per gallon than pure gasoline. To achieve the correct stoichiometric combustion ratio, engines running on E85 must inject approximately **30% to 35% more liquid fuel volume** to produce the exact same horsepower, necessitating much larger injectors and high-flow fuel pumps.
What is Brake Specific Fuel Consumption (BSFC)?
BSFC measures how many pounds of fuel an engine consumes each hour to generate one horsepower ($lbs / hp \cdot hr$). Standard naturally aspirated engines have a BSFC of around 0.45 to 0.50. Forced induction turbo/supercharged engines require extra fuel for in-cylinder charge cooling and have a richer BSFC of 0.55 to 0.65.