๐ŸŠ APSP Pool & Spa Professional Standards

Swimming Pool Volume & Saltwater Calculator

Calculate total pool volume in gallons, pump turnover flow rate (GPM), and salt bags needed for saltwater chlorine generators.

๐Ÿ“ Pool Dimensions & Depth Profile

ft
ft
ft
ft
ppm

๐ŸŽฏ Pool Capacity & Equipment Sizing

Total Water Capacity
21,050
US Gallons (80,000 Liters)
Requires Minimum 44 GPM Pump Turnover
Salt Bags (3200 ppm)
13 Bags
40 lb Solar Salt Bags
Shock Chlorine (Cal-Hypo)
2.1 lbs
1 lb per 10,000 gallons
Average Water Depth
5.5 Feet
Water Surface Area
512 sq ft
Total Water Weight
โ‰ˆ 175,000 lbs (87.5 Tons)
Filter Run Time
8 Hours / Day (1 Turnover)

๐Ÿ› ๏ธ Recommended Tools, Hardware & Building Supplies

Hayward W3SP2610X15 Super Pump 1.5 HP Pool Pump
Industry-standard large-capacity commercial pool pump with heavy-duty motor and see-through strainer cover.
Check on Amazon โ†’
Morton Pure and Natural Solar Salt Crystals for Pools (40 lb)
99.8% pure natural evaporated salt crystals designed specifically for electrolytic chlorine generators.
Check on Amazon โ†’
Taylor Complete FAS-DPD Pool Water Test Kit (K-2006)
Professional grade titration drop test kit for free chlorine, pH, alkalinity, calcium hardness, and CYA.
Check on Amazon โ†’
Dolphin Nautilus CC Plus Robotic Pool Cleaner with Dual Scrubbing Brushes
Automated pool vacuum cleans floor and walls with top-loading ultra-fine filters.
Check on Amazon โ†’

โš–๏ธ Affiliate Notice: As an Amazon Associate, this site earns from qualifying purchases at no additional cost to you. We strictly link to trade-grade construction tools, hardware, and safety materials.

Frequently Asked Questions

What is the recommended salt level for a saltwater swimming pool?
Most saltwater chlorine generators (Hayward AquaRite, Pentair IntelliChlor) operate optimally between 2,800 and 3,400 ppm (parts per million), with 3,200 ppm being the industry gold standard. Water tastes salty only above 5,000 ppm (human tears are 9,000 ppm, ocean seawater is 35,000 ppm).
How many hours a day should a pool pump run?
A pool pump should run long enough each day to turn over (filter) the entire volume of pool water at least once. During summer swimming season, this generally equates to 8 to 10 hours per day. Using an energy-efficient Variable Speed Pump (VSP) running at low RPM for 12 hours saves up to 80% on electrical bills compared to a single-speed pump.
How do you calculate pool volume in an irregularly shaped freeform pool?
To approximate freeform pool volume: measure the longest length and the average width across the widest and narrowest points. Multiply $Length imes Average Width imes Average Depth imes 7.5 imes 0.85$ (the 0.85 multiplier accounts for curving radial corners and internal steps).