โšก Blasting Standards & Fluid Air Compression Ratios

Sandblasting Nozzle CFM & Compressor Calculator

Calculate required air volume (CFM at 90 PSI), minimum compressor horsepower, and tank size based on blast nozzle orifice diameter.

๐Ÿ“ Blaster Nozzle & Operating Pressure

PSI
Standard abrasive blasting = 80โ€“100 PSI

๐Ÿ“Š Compressor Requirements & Sizing

21.0 CFM @ 90 PSI
Required Continuous Air Delivery
Minimum Compressor Motor HP
5.0 โ€“ 7.5 HP (2-Stage)
Minimum Receiver Tank Size
60 to 80 Gallons
Recommended Air Hose Inner Diameter
1/2" ID Hose Minimum
Silica Sand Hazard Alert
OSHA Crystalline Silica Ban

๐Ÿ› ๏ธ Recommended Blast Cabinets, Ceramic Nozzles & Air Dryers

Benchtop Heavy-Duty Steel Abrasive Sandblasting Cabinet
Sealed blasting cabinet with built-in halogen lamp, heavy rubber gauntlets, and siphon blast gun.
Check on Amazon โ†’
Tungsten Carbide Long-Life Blast Nozzles (#3 / #4 Pack)
Ultra-hard wear-resistant tungsten nozzles lasting 50x longer than standard cheap ceramic tips.
Check on Amazon โ†’
Dual Stage Compressed Air Filter & Desiccant Dryer (1/2" NPT)
Removes 99.9% of moisture and oil to prevent damp abrasive media clumping in your blast siphon.
Check on Amazon โ†’
Brown Aluminum Oxide Blasting Media (70 Grit / 25 lbs)
Sharp, highly recyclable fast-cutting abrasive ideal for powder coat removal and metal etching.
Check on Amazon โ†’

โš–๏ธ Affiliate Notice: As an Amazon Associate, this site earns from qualifying purchases at no additional cost to you. We strictly link to blast cabinets, tungsten carbide nozzles, and desiccant air dryers.

Frequently Asked Questions

Why is my air compressor running constantly while blasting?
Sandblasting is the single most air-intensive workshop tool. A small #4 nozzle (1/8") consumes 21 CFM continuously. If your compressor produces only 12 CFM, your tank pressure will rapidly plummet below the 80 PSI needed for productive blasting.
Can I use beach or playground play sand?
ABSOLUTELY NOT. OSHA strictly prohibits using crystalline silica sand for abrasive blasting. When silica sand impacts metal, it fractures into microscopic respirable crystalline dust that causes irreversible, incurable silicosis lung disease.
Why does moisture in the airline cause blasting to fail?
Compressed air creates significant condensation. Water droplets mixing with fine blast abrasive in the nozzle cause instant caking and mud clogs. A dedicated particulate filter and desiccant air dryer are mandatory.