๐Ÿ“ IRC Building Code (Section R311)

Stair Stringer & Layout Calculator

Calculate exact unit rise, unit run, total steps, stringer lumber length (2x12), and IRC building code compliance.

๐Ÿ“ Overall Stair Rise & Dimensions

inches

๐ŸŽฏ Stringer Cut Specifications

Exact Riser Height (Unit Rise)
7.56
Inches Per Step (Code Compliant)
9 Steps (9 Risers & 8 Treads)
2x12 Lumber Length
12 ft Board
Requires 3 Stringers
Total Horizontal Run
88 Inches
โ‰ˆ 7 ft 4 inches
Stair Incline Angle
34.5ยฐ (Ideal 30ยฐ-37ยฐ)
Code Rule (2R + T)
26.1" (Ideal 24"-26")
Stringer Throat Depth
โ‰ฅ 5.0" Solid Wood (IRC)
Stringer Connectors
3ร— LSCZ Brackets

๐Ÿ› ๏ธ Recommended Tools, Hardware & Building Supplies

Starrett 111 Stair Gauge Clamps for Framing Square
Solid brass fixtures clamp to framing square edges for laying out identical step rise and run notches.
Check on Amazon โ†’
Simpson Strong-Tie LSCZ Adjustable Stringer Connectors (Pack of 4)
ZMAX galvanized steel brackets secure 2x12 stair stringers to deck rim joists and concrete pads.
Check on Amazon โ†’
DEWALT 7-1/4" 24-Tooth Framing Saw Blade (3-Pack)
Tough carbide tooth circular saw blades for fast, clean stringer cuts without binding.
Check on Amazon โ†’
Johnson Level 16" x 24" Steel Carpenter Framing Square
Laser-etched graduations with English tables for rapid stair rafter and stringer calculations.
Check on Amazon โ†’

โš–๏ธ Affiliate Notice: As an Amazon Associate, this site earns from qualifying purchases at no additional cost to you. We strictly link to trade-grade construction tools, hardware, and safety materials.

Frequently Asked Questions

What is the maximum step riser height allowed by residential building code?
Under IRC Section R311.7.5.1, the maximum unit riser height for residential stairs is 7.75 inches (197 mm), and the minimum tread depth is 10 inches (254 mm). The greatest riser height within any flight of stairs cannot exceed the smallest by more than 3/8 inch.
How many stair stringers are needed for a 36-inch or 48-inch wide deck staircase?
For standard 2x6 lumber treads, stringers can be spaced up to 16 inches on-center (3 stringers for a 36-inch stair). For composite deck treads (which flex more easily under heat), stringers must be spaced 12 inches on-center (4 stringers for a 36" stair, 5 for a 48" stair).
What is the minimum stringer throat depth?
After cutting out all step notches from a 2x12 lumber board, the remaining solid uncut wood (the throat) must measure at least 5.0 inches (measured perpendicularly from the inside corner of the notch to the bottom edge of the board).