๐Ÿ”จ APA The Engineered Wood Association

Subfloor Plywood & Screw Fastener Calculator

Calculate 4x8 OSB/plywood sheets, collated subfloor screws (12" field / 6" edge), and adhesive tubes.

๐Ÿ“ Room Floor Dimensions & Joist Spacing

ft
ft

๐ŸŽฏ Subfloor Fastening Requirements

Total Subfloor Screws Required
720
Subfloor Screws (6" Edge / 12" Field)
โ‰ˆ 1 Box of 1,000 Collated Screws
4x8 T&G OSB Sheets
13 Sheets
+8% Cut Waste Buffer
Subfloor Adhesive (28oz)
5 Tubes
PL Premium Polyurethane
Total Floor Area
384 sq ft
Screws Per Sheet
โ‰ˆ 55 Screws (16" OC)
Recommended Screw Length
2-Inch #8 or #9
Expansion Gap at Seams
1/8" (Dime Thickness)

๐Ÿ› ๏ธ Recommended Tools, Hardware & Building Supplies

Simpson Strong-Tie Quik Drive PRO200SG2 Subfloor Auto-Feed System
Stand-up collated screw gun drives subfloor screws in seconds without worker back fatigue.
Check on Amazon โ†’
Simpson Strong-Tie 2" Subfloor Collated Screws (Box of 1000)
Ribbed flat-head screws countersink cleanly into OSB and eliminate squeaks between plywood and joists.
Check on Amazon โ†’
Loctite PL Premium 3X Polyurethane Subfloor Adhesive (28 oz)
Bonds wet, frozen, and treated lumber, bridging gaps up to 3/8 inch to permanently stop floor squeaks.
Check on Amazon โ†’
Newborn Pro Heavy-Duty 28-oz Caulking Gun (26:1 Thrust Ratio)
Commercial-grade smooth hex rod caulking gun easily dispenses thick polyurethane subfloor glue.
Check on Amazon โ†’

โš–๏ธ Affiliate Notice: As an Amazon Associate, this site earns from qualifying purchases at no additional cost to you. We strictly link to trade-grade construction tools, hardware, and safety materials.

Frequently Asked Questions

What causes subfloor squeaks and how do screws prevent them?
Squeaks occur when smooth-shank nails loosen slightly over time as joists shrink and expand with seasonal humidity. When walked on, the plywood rubs up and down along the loose nail shank. High-tensile coarse-threaded subfloor screws combined with polyurethane subfloor adhesive create a permanent monolithic bond that never loosens.
Why is an 1/8-inch expansion gap required between subfloor sheets?
Engineered wood panels (OSB and plywood) expand slightly when absorbing atmospheric humidity. If sheets are butted tightly together with no gap, the edges buckle upward at the seams, creating noticeable ridges under carpet, tile, or hardwood flooring.
What is the APA standard screw spacing for subfloors?
APA (The Engineered Wood Association) specifies screws spaced 6 inches apart along all panel supported edges, and 12 inches apart across intermediate interior joists (the field).